Difference between revisions of "Lxd prep"
Jump to navigation
Jump to search
(Created page with "``` sudo apt update && sudo apt upgrade sudo apt install zfsutils-linux sudo zpool create -f tank mirror nvme0n1 nvme1n1 nvme2n1 nvme3n1 lxd init ``` /etc/netplan/00-custom.y...") |
|||
| Line 4: | Line 4: | ||
sudo zpool create -f tank mirror nvme0n1 nvme1n1 nvme2n1 nvme3n1 | sudo zpool create -f tank mirror nvme0n1 nvme1n1 nvme2n1 nvme3n1 | ||
lxd init | lxd init | ||
| + | # lxd init --dump | ||
``` | ``` | ||
Revision as of 20:52, 24 November 2023
sudo apt update && sudo apt upgrade sudo apt install zfsutils-linux sudo zpool create -f tank mirror nvme0n1 nvme1n1 nvme2n1 nvme3n1 lxd init # lxd init --dump
/etc/netplan/00-custom.yaml
# This is the network config written by 'subiquity'
network:
bonds:
bond0:
dhcp4: no
dhcp6: no
interfaces:
- eno1
- eno2
- eno3
- eno4
parameters:
lacp-rate: slow
mode: 802.3ad
transmit-hash-policy: layer2+3
bridges:
vlan3:
interfaces: [ bond0.3 ]
vlans:
bond0.3:
link: bond0
id: 3
accept-ra: no
bond0.2:
link: bond0
id: 2
accept-ra: no
addresses:
- 10.x.4.12/22
routes:
- to: default
via: 10.x.4.1
metric: 100
nameservers:
addresses: [10.x.4.1]
search: []
ethernets:
eno1: {}
eno2: {}
eno3: {}
eno4: {}
version: 2