Difference between revisions of "Ip"
(Created page with "# Sites https://raymii.org/s/tutorials/KVM_with_bonding_and_VLAN_tagging_setup_on_Ubuntu_12.04.html#Set_up_network_bridge_for_VLAN https://wiki.archlinux.org/index.php/VLAN#C...") |
|||
| Line 1: | Line 1: | ||
| + | iproute2 and other ip resources on linux | ||
| + | |||
# Sites | # Sites | ||
| − | https://raymii.org/s/tutorials/KVM_with_bonding_and_VLAN_tagging_setup_on_Ubuntu_12.04.html#Set_up_network_bridge_for_VLAN | + | - https://access.redhat.com/sites/default/files/attachments/rh_ip_command_cheatsheet_1214_jcs_print.pdf |
| − | + | - https://raymii.org/s/tutorials/KVM_with_bonding_and_VLAN_tagging_setup_on_Ubuntu_12.04.html#Set_up_network_bridge_for_VLAN | |
| − | https://wiki.archlinux.org/index.php/VLAN#Create_the_VLAN_device | + | - https://wiki.archlinux.org/index.php/VLAN#Create_the_VLAN_device |
| − | + | - https://wiki.ubuntu.com/vlan | |
| − | https://wiki.ubuntu.com/vlan | + | - https://pve.proxmox.com/wiki/Network_Model |
| − | + | - https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configure_802_1q_vlan_tagging_using_the_command_line | |
| − | https://pve.proxmox.com/wiki/Network_Model | ||
| − | |||
| − | https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configure_802_1q_vlan_tagging_using_the_command_line | ||
Revision as of 04:16, 22 March 2020
iproute2 and other ip resources on linux
Sites
- https://access.redhat.com/sites/default/files/attachments/rh_ip_command_cheatsheet_1214_jcs_print.pdf
- https://raymii.org/s/tutorials/KVM_with_bonding_and_VLAN_tagging_setup_on_Ubuntu_12.04.html#Set_up_network_bridge_for_VLAN
- https://wiki.archlinux.org/index.php/VLAN#Create_the_VLAN_device
- https://wiki.ubuntu.com/vlan
- https://pve.proxmox.com/wiki/Network_Model
- https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-configure_802_1q_vlan_tagging_using_the_command_line
change portchannel 2 settings to 802.1q
conf t int port-chan 2 switchport trunk encapsulation dot1q switchport trunk allowed vlan 101-104 switchport mode trunk end Here you can manually add it without downtime or you can make it permanent and restart networking
ip link add name bond1.101 link bond1 type vlan id 101 ip addr add 10.1.1.11/24 dev bond1.101 ip link set dev bond1.101 up Make it permanent on network restart
auto bond1.101
iface bond1.101 inet manual
iface bond1.101 inet static
address 10.1.1.11
netmask 255.255.255.0
vlan_raw_device bond0
systemctl restart networking
ip route add 10.0.0.0/16 via 10.0.1.1 dev bond0
ip route add 0.0.0.0/0 via 10.1.1.1 dev bond1.101
manual
ip link add name bond1.101 link bond1 type vlan id 101 ip addr add 10.1.1.11/24 dev bond1.101 ip link set dev bond1.101 up
down
ip link del name bond1.101 link bond1 type vlan id 101
ip link del dev bond1.101 ip addr del 10.1.1.11/24 dev bond1.101 ip link set dev bond1.101 down
vconfig add bond1 101 ip addr add 10.1.1.11/24 dev bond1.101 ip link set up bond1.101
DEVICE=eth1.10 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.10.1 PREFIX=24 NETWORK=192.168.10.0 VLAN=yes
systemctl restart network
cat /proc/net/vlan/config